Addtime： 2020-07-17 Browse times： 3053
Vacuum pump is made of stainless steel as the main material of vacuum equipment, so its advantage is not rusty. When using the equipment, we should be prepared for energy saving, which can prolong the service life of the equipment and reduce the power consumption of the equipment?
1. For the vacuum pump bearing damage: the treatment method is to check, repair or replace the bearing.
2. High speed: check the driver and power supply.
3. Vacuum pump liquid density increase: treatment method is to check the liquid density.
4. Pump shaft bending: the treatment method is to correct the pump shaft.
5. Vacuum pump packing pressed too tight or dry friction: treatment method is to relax the packing, check the water seal pipe.
6. Impeller and wear ring, impeller and shell friction, treatment method is to check and repair.
7. Failure of axial force balance device: the treatment method is to check whether the balance hole and return water pipe are blocked.
8. Poor alignment of coupling or too small axial clearance: the treatment method is to check the alignment and adjust the axial clearance.
In short, in order to reduce the power consumption of vacuum pump, maintenance work is very important. We should regularly replace parts, check the condition of other parts, repair in time, check the liquid density, and correct the pump shaft. In addition, the correct use and maintenance can also reduce the power consumption of the equipment.
Scan QR code and add wechat
Download
Vacuum knowledge
Service
Contact us